If You Read One Article About Machines, Read This One

What You Stand to Gain By Using Waterjet Cutting for Materials

Waterjet cutting is a technology applied to the cutting of metals and other materials in the industrial process. A water jet at very high pressure is normally used, sometimes in combination with either an oxy-fuel flame or plasma to do the cutting. The waterjet machine cuts with a high degree of accuracy and this produces a very clean cut. And the fact that waterjet cutting causes very little wastage of the materials means that it is ideal for working on materials that are quite costly and rare. The cutting method finds its application in various industrial process in the manufacture and fabrication of producrts made of metal and other hard materials. Waterjet cutting is advantageous in a number of ways. Here are some benefits of cutting substances using a waterjet cutting machine.

When cutting using a waterjet machine, there is no heat evolved. Most of the traditional methods of cutting hard materials such as metal normally uses heat. High temperatures are necessary to produce heat that burns through the material thereby separating it at the point of cutting. This is usually disadvantageous in case the material being cut is sensitive to heat. These delicate materials can easily be damaged by the heat, meaning that you cannot use them anymore. But waterjet cutting can easily be used for such materials because it works with pressure rather than heat.

When cutting with a waterjet machine, little raw material is wasted because of the high accuracy involved. Waterjet cutting deals with a high degree of precision. The waterjet machine makes cuts in the material which are very narrow in width, sometimes under a millimeter. As compared to other methods of cutting, very little of the material is treated as waste after cutting. And since it is carried out using computer software that are quite advanced, it is possible to get even higher degree precision cuts.

Waterjet cutting is applicable for cutting all kinds of material. Laser and plasma cutting, as well as use of oxy-fuel flame normally involve lots of heat Because of this, they cannot be used on materials that are either soft or fragile. Waterjet cutting, on the other hand, can be used for cutting all types of material, making it a truly versatile method of cutting substances.

The other benefit of using waterjet cutting is the fact that it leaves very little debris after cutting. Because of the deformation and warping on the cut surface caused by the other ways of cutting, it is necessary to smoothen it by either grinding or use of a sand paper. But surfaces cut using a waterjet cutting machine are usually cleaner and require very minimal finishing. The cleanup work is therefore considerably reduced, meaning that the industry can commit labor to other productive tasks.

5 Takeaways That I Learned About Equipment

5 Takeaways That I Learned About Equipment